Glow in the Dark DTF Transfers – A5 Cold Peel Heat Transfers (148 x 210mm)

Glow in the Dark DTF Transfers – A5 (148 x 210mm)

Print. Press. Switch off the lights.

Make your designs work day and night with our Glow in the Dark DTF Transfers in A5. In daylight your artwork shows in full, vivid colour. In the dark, the glow layer lights it up, giving you a head-turning effect for nightlife merch, Halloween drops, kidswear and event clothing.

The A5 sheet (148 x 210mm) is the go-to size for left-chest logos, pocket prints, sleeves and small accessories. Upload one design or fit several small ones on the sheet, then press straight onto cotton, polyester or poly-cotton blends. No vinyl, no weeding, no cutting.

Every transfer is cold peel, so the film lifts away cleanly once cooled and leaves sharp edges and fine detail on the garment.

Key Benefits of A5 Glow in the Dark DTF Transfers

Two Looks in One Print — Full colour under light and a bright glow in the dark, from a single transfer.

Small-Format Precision — A5 keeps fine lines and small text crisp, which makes it ideal for logos, badges and crests.

Works on Light and Dark Garments — Presses onto 100% cotton, polyester, poly-cotton, canvas and more, in any garment colour.

Glows Again and Again — The glow recharges every time it sees light. No batteries, no extra steps.

Perfect For

• Left-chest logos and pocket prints for club nights, gigs and festival crews
• Kids’ t-shirts, pyjamas and school event wear
• Halloween, Bonfire Night and Christmas designs
• Tote bags and small accessories
• Test runs before you scale up to A4, A3 or a full metre

Product Specifications

How to Apply

• Pre-press your garment for about 3 seconds to remove wrinkles and moisture.
• Place the transfer on the garment, printed side facing the fabric.
• Heat press at 150–160°C for 10–15 seconds with medium to high pressure.
• Leave the transfer and garment to cool completely.
• Once cold, peel the film away slowly from one corner.
• Re-press for 3–5 seconds under parchment paper or a Teflon sheet for extra durability.

How to Get the Brightest Glow

• Charge it in daylight or under a bright lamp for a few minutes. Sunlight gives the strongest glow.
• White and light areas of your artwork glow the brightest. Black areas do not glow.
• Bold shapes glow better than thin lines.
• The glow is brightest in the first few minutes of darkness, then gradually fades until it is recharged.

Pro Tip: This is a cold peel transfer. Never peel it while it is warm. Let it cool fully before removing the film, and test your heat press settings on a spare garment before a full run.

Artwork Guidelines

• Supply artwork at 300 DPI or higher
• Use a transparent background (PNG)
• Convert fonts and strokes to outlines
• Flatten effects such as shadows and transparencies
• Use plenty of white or light colour where you want the strongest glow

Care: Wash inside out on a cool wash, tumble dry low or hang dry, and never iron directly on the print.